Products Index


 
Deep Drop Shank / DSB5
DSB5
Deep Drop Shank / DSB7
DSB7
Deep Drop Shank / DSB9
DSB9
 

Weight Distributing Systems Accessories Only

DSB5
DSB7
DSB9
D257
D259
W1DH
W3DH
W4DH
WL24
W6DH
W7DH
W9DH
   
2"-5 5/8" drop shank, 8 7/8" rise shank - 13" long
2"-6 7/8" drop shank, 10 1/8" rise shank - 11" long
2"-8 3/4" drop shank, no rise - 11" long  
2 1/2"-6 7/8" drop shank, 10 1/8" rise shank - 11" long
2 1/2"-8 3/4" drop shank, no rise - 11" long  
chain, U-bolt, nuts & washers  
hook up handle  
hair pin hook up wire clip  
wire lock hook up clip - 2" long, 1/4" dia.
hitch head for #WD10  
1-spring clip, 1-set key and 1-drive rivet for #WD10  
spring bar and chain for #WD10  
  Weight
27 lb
28 lb
29 lb
34 lb
35 lb
3.2 lb
1.9 lb
0.04 lb
0.07 lb
16.4 lb
0.03 lb
14 lb
  Std. Pack
1/box
1/box
1/box
1/box
1/box
1/bag
1/bag
1/bag
10/bulk
1/box
1/bulk
1/bulk
  Master Pack
1
1
1
1
1
20
10
50
100
1
1
1

 SCLR
sway control bar / SCLR
Ball Mount Sway Control Bracket / BB30
BB30      
(bracket only)
Sway Control Bar
* SCLR comes complete with both sway balls
* Chrome sway ball has an extra long shank that will go through 7/8" material
* Easy left or right side installation
* Friction pads permanently welded in place

SCLR
SCCB
SCSB
SCTP
BB30
   
sway control bar
1 1/4" replacement ball, chrome
replacement slide bar
replacement ball tongue plate
sway control bracket (bracket only), fits 3" wide tongues only, black
  Weight
14.5 lb
0.7 lb
3.7 lb
0.9 lb
3 lb
  Std. Pack
1/box
1/box
1/bulk
1/bulk
10/bulk*
*Available in individual box


No lock-out design 5th Wheel Hitch / FA16
5th Wheel Hitch Accessories

FWH2
FWH3
FWH4
FWH5
   
frame mounting brackets & bolt pack
rail pins with clips (4) for one FA16
spring package
nut and bolt for hitch handle
  Weight
16.5 lb 
 1.9 lb
0.1 lb
0.02 lb
  Std. Pack
1/box
1/bag
1/bag
1/bag
  Master Pack
10
40
20
20

Universal Bumper Tube Hitch / UBTH
UBTH
Step Bumper Tube Hitch / SBTHSBTH
Step Bumper Tube Hitches
UBTH can be used with any standard 2" square ball mount. Mounting plate hole pattern is 8 1/2" center to center for front holes, 5" center to center for back holes and are 2" apart (must be installed with all hardware provided). Load rating is 5,000 lb GVW and 500 lb tongue weight.

SBTH can be used with any standard 2" square ball mount. Mounting plate hole pattern is 6 1/2" center to center for front holes, 4 1/2" center to center for back holes and are 2" apart (must be installed with all hardware provided). Load rating is 3,500 lb GVW and 350 lb tongue weight.


UBTH
SBTH
   
universal bumper tube hitch  
step bumper tube hitch  
  Weight
12 lb
  8 lb
  Std. Pack
1/box
1/box

Rear Trailer Receiver for Hitch Accessories / RHT2
Rear Trailer Receiver For Hitch Accessories
* Adjustable from 47 3/8" to 77" inside frame dimensions
* Max load capacity is 350 lb
* Use with 2" bicycle carriers, cargo carriers, etc. (not to be used for towing)
* Weld-on frame brackets for universal fit
* Powder coated black finish

RHT2
   
adjustable, weld-on 2" rear receiver  
  Weight
53 lb
  Std. Pack
1/box

Previous page | Next page | Products Index | Top of page | Home

For a dealer near you call 1-800-637-8258

Copyright © 1999-2019   C.R. Brophy Machine Works, Inc.